Our LED downlights have been tested on a wide range of standard dimmer switches and home automation systems, so we are confident that they will work with 95% of standard dimmer switches on the market, due to the number of dimmer switches we have not been able to test our dimmable LED downlights on all switches.If you are not sure if your dimmer switch will work please contact us with the make and ...

The LED downlight shall be installed in accordance with Australian/NZ electrical standards.The LED downlight shall be installed in locations and in conditions as described in Figure 1 and Table 1.Please make sure all electricity is switched of at the main switch board before any electrical works are to commence. Cut out the hole according to the downlight's specifications.The LED driver is supplie...

For all LED downlight installations, you need a transformer or driver as it is also known.This driver reduces the voltage from 110/240 volt to 10-38 volt DC.All our LED down lights run on DC voltage, so you can not connect your 110/240 volt supply directly onto the mains 240 volt supply.If you have a specific custom requirement please Contact Us with the details and our team will come back to you...

The diffuser cover is made of PMMA and light diffuser material, the special material make the light soft and evenness, generally, the Transmittance of diffuser cover is 86%, the clear cover is 93%.

Because warm white use more phosphor to mix the color, and reduce the light output. Cool white use less phosphor, so it's high light output.

LED downlights use the latest LED technology. They are not like the old types you may remember from school days of a little plastic dome with two pronged tails!The latest LED technology is a flat chip that is soldered to a circuit board. These new style of LED chips produce superb amounts of light that you can now use to replace halogen downlights or for larger commercial installs metal halide or ...

Here is a table to show how our range of LED downlights compare to halogen types in the most popular domestic applications.Halogen WattageLED Equivalent Wattage10 Watt1 Watt20 Watt1-3 Watt30 Watt3 Watt40 Watt5-7 Watt50 Watt9 Watt60 Watt12-15 Watt75 Watt15-18 Watt90 Watt18 Watt100 Watt +20 Watt +

LED lights can be manufactured in any colour temperature (as expressed as degrees kelvin). Buddy Lighting chooses to design and promote LED lights utilising "Warm White" light. Based on the science of lighting and its effect on health, we believe this colour temperature range to be the most logical choice.

Buddy Lighting LED downlights can not only produce as much light as 50W halogen downlights, they can produce better light. The amount of light (lux) produced by both types of lights depends greatly on the positioning of the fittings and the height at which the light is required.

Any LED light labelled as dimmable can be used in a standard household dimmer - ie "Leading Edge", "trailing edge" Dimmers.

Although LED lighting cannot really be directly compared to a 50W halogen, the amount of light equivalent to a 50W halogen can be found in a Buddylighting 13W LED down lights. Why not convert your MR16 fitting to our 13W sharp LED down light for energy savings and better LED longevity.For more informtion about the MR16 fitting replacer, refer to the link: http://..........com/pid11364805/...

Why LED's? As a rule, LED bulbs use 90% less electricity than standard bulbs. They have an unparalleled even spectrum of light and have a lifespan beyond ten years. LED's provide us the most efficient way to save energy and conserve our natural resources. If LED's were implemented right now universally, we would not need to build another power plant. LEDs would actually eliminate the need for o...

Unlike other lighting technologies, solid state (LED) lighting as an emerging technology in the general lighting industry is just at its beginning - a kind of new frontier. As the industry continues to evolve and mature, LED lighting brings with it a bright future. But, until the future arrives, we live in the Wild West where there are few rules, few standards, and little enforcement within the in...

LEDs (light emitting diodes) are solid-state lighting devices that produce light when a forward voltage is applied. An LED consists of a semiconductor diode packaged in a clear epoxy or silicon gel. The diode contains two slightly different materials: a P-type semiconductor and an N-type semiconductor. The P-type semiconductor has "holes" created by a lack of electrons, producing a positive charge...